Motion Sensor · Microwave Sensors

Model NANO PRO-S · by Sensinova

Sensinova NANO PRO-S Motion Sensor Dealer in Ahmedabad

Sensinova NANO PRO-S is a Surface Mount-mounted microwave motion sensor with 360° detection and Movement 3-4m · Slight motion 3-4m · Breathing 2-3m. Hold time 5sec–30min · load 800W LED · IP20. True Presence sensor.

  • MountingSurface Mount
  • Detection360°
  • RangeMovement 3-4m · Slight motion 3-4m · Breathing 2-3m
  • Hold Time5sec–30min
  • Load Capacity800W LED
  • ProtectionIP20
Enquire on WhatsApp
  • Datasheet & wiring diagram on request
  • Manufacturer warranty
  • PAN-India dispatch

Technical specifications

Full spec sheet.

Complete specs for the NANO PRO-S sensor. Wiring diagrams, commissioning notes and compatibility data on request.

Model NANO PRO-S
Brand Sensinova
Family Microwave Sensors
Mounting Surface Mount
Detection Pattern 360°
Detection Range Movement 3-4m · Slight motion 3-4m · Breathing 2-3m
Hold Time 5sec–30min
Load Capacity 800W LED
Ingress Protection IP20
Notes True Presence sensor
Warranty As per manufacturer terms

Specifications subject to change per the manufacturer's current brochure. Wiring diagrams and commissioning notes on request.

Specifier FAQs

Common questions.

What is the detection range of the Sensinova NANO PRO-S?

The detection range is confirmed in the spec table above. Range is sensor-side adjustable across most Sensinova SKUs and finalised at commissioning. PIR sensors typically detect to 8-20m, microwave sensors to 4-16m, true-presence sensors to 2-3m.

What load can the Sensinova NANO PRO-S switch?

The switchable load is confirmed in the spec table above — typical Sensinova loads span 200W LED to 10A across the range. Always check the load against actual fixture wattage before specifying, especially on retrofit projects with mixed driver types.

Is the Sensinova NANO PRO-S compatible with TRIAC, 0-10V or DALI dimming?

Most Sensinova sensors switch loads on/off. Dimmable variants with 1-10V output are available — confirmed per SKU. For DALI dimming, pair the sensor with a DALI controller downstream so the protocol matches the rest of the lighting scheme.

What is the IP rating?

IP rating is confirmed in the spec table above. IP20 for indoor ceilings, IP44 / IP54 for damp areas like washrooms and kitchens, IP65 for outdoor and wall-mounted exposure. Wardrobe sensors are typically unrated (interior cabinet use).

Is there a warranty?

As per Sensinova manufacturer terms — standard 2-year warranty on the sensor module, with PAN-India replacement support via Bright Ideas.