Bollards & Wall Lights

Hybec · Outdoor Lighting

192 models, built for the weather.

Architectural LED bollards and outdoor wall fixtures for entries, driveways, pathways and perimeter lighting in residential, hospitality and commercial projects.

IP54 & IP65 192 SKUs Hybec catalogue by Hybec →

Where these get used

Applications & typical installations.

Most commonly used in the project types below — across homes, hotels, commercial spaces and landscape projects.

  • Residential driveways & entry porticos
  • Hotel forecourts & porte-cochères
  • Garden and courtyard pathways
  • Commercial campus perimeters
  • Apartment building approaches

A quick buyer's guide

How to pick the right one.

The things to think about when choosing the right model for your project — from weatherproofing to beam angle to how it gets mounted.

  1. 01 IP54 for sheltered porticos; IP65 for fully exposed installations
  2. 02 Bollard heights 0.5–1.2m for path edges; pole-mounted 2.5–6m for driveways and forecourts
  3. 03 Symmetric 360° optics for general illumination, asymmetric for one-sided path-edge lighting
  4. 04 Spacing 5–10m between bollards for residential paths; wattage scaled to area size

What's standard across the range

Built-in quality features.

  • Graphite or dark-grey die-cast aluminium body
  • Bridgelux, Cree, Everlight or Epistar LED engines
  • Pole adapter options: 2.5m, 3m, 3.65m, 4m, 5m, 6m heights
  • Tempered glass or polycarbonate diffuser, weatherproof finish

In this range

All 192 models.

Tap any model for the full specifications — wattage, beam angle, brightness, dimensions, weatherproof rating and LED source. Colour temperature and colour accuracy confirmed at quotation.

FAQs

Common buyer questions.

Quick answers to the questions we hear most often about this range.

What IP rating do bollard and outdoor wall lights need in India?

IP65 is the practical minimum for anything exposed to monsoon rain. Bollards sitting in planted beds or near irrigation should be IP66, and any fixture that could sit in standing water needs IP67. Covered porches and canopies can drop to IP54.

How far apart should bollards be spaced?

Space bollards at roughly two to three times their mounting height — about 2.5 to 4 metres apart for a 900mm bollard. Stagger them alternately rather than in facing pairs, which avoids a runway effect and keeps light levels even along the path.

What height should a bollard light be?

600–900mm suits garden paths and planted borders. 900–1200mm suits driveways and wider walkways where you need a longer throw. Above 1200mm you are usually better off with a post-top or wall-mounted fixture.

Will bollard lights survive Indian summers and monsoon?

Specify die-cast aluminium bodies with powder-coated finishes and marine-grade fixings for coastal sites. The two things that kill outdoor fixtures here are water ingress at the gland and UV degradation of the gasket, so both the IP rating and the gasket material matter.