PIR Sensors
Motion Sensor · PIR Sensors
Model IRIS F8 · by Sensinova
Sensinova IRIS F8 is a Flush-mounted PIR (passive infrared) motion sensor with 360° detection and 8m max (<24°C). Hold time 10sec–12min · load 200W LED · IP20.
Technical specifications
Complete specs for the IRIS F8 sensor. Wiring diagrams, commissioning notes and compatibility data on request.
| Model | IRIS F8 |
|---|---|
| Brand | Sensinova |
| Family | PIR Sensors |
| Mounting | Flush |
| Detection Pattern | 360° |
| Detection Range | 8m max (<24°C) |
| Hold Time | 10sec–12min |
| Load Capacity | 200W LED |
| Ingress Protection | IP20 |
| Warranty | As per manufacturer terms |
Specifications subject to change per the manufacturer's current brochure. Wiring diagrams and commissioning notes on request.
From the same family
Specifier FAQs
The detection range is confirmed in the spec table above. Range is sensor-side adjustable across most Sensinova SKUs and finalised at commissioning. PIR sensors typically detect to 8-20m, microwave sensors to 4-16m, true-presence sensors to 2-3m.
The switchable load is confirmed in the spec table above — typical Sensinova loads span 200W LED to 10A across the range. Always check the load against actual fixture wattage before specifying, especially on retrofit projects with mixed driver types.
Most Sensinova sensors switch loads on/off. Dimmable variants with 1-10V output are available — confirmed per SKU. For DALI dimming, pair the sensor with a DALI controller downstream so the protocol matches the rest of the lighting scheme.
IP rating is confirmed in the spec table above. IP20 for indoor ceilings, IP44 / IP54 for damp areas like washrooms and kitchens, IP65 for outdoor and wall-mounted exposure. Wardrobe sensors are typically unrated (interior cabinet use).
As per Sensinova manufacturer terms — standard 2-year warranty on the sensor module, with PAN-India replacement support via Bright Ideas.
A lighting consultant will be in touch shortly.
